juicey

[d-a-n]

heres a juicey morsal to sink your teath into ccchhheeezzzzzzzz


ITS MT PROJECT X-1 WITH 50 CC MOTOR SWAP !!!!!!!!

[blah]

:D Outfarkingstanding

[d-a-n]

Thanks Bla A Few More For That Azz .......fliped Rear Swing Arm

[Freezuzmice]

I just happen to have a freshly rebuilt, bored, ported, 79XR80 motor that has been taunting me ever since I bought my X1. I have found the little 2stroke quite dissapointing. Nice to know I'm not the only one.

Does anyone have any ideas about the suspension on these things?
I mean.... The frame geometry is nearly perfect. (handles pretty good)
But the rear "shock" might as well just be a rubber bumper. And the forks flex like a cane pole.


Does anyone remember the Yamaha YSR50?

[d-a-n]

I Tooo Was Disapointed At The 2 Stroke Motor ,if I Were You I'd Inplant That Motor You Have With The Quickness....as For The Shocks (if We Can Call Them That) Their Is A Few Thigs You Can Do ....note I Have Not Tried But Others Have Successfuly ..you Can Install 2 Gass-assist Shocks In Front For Extra Support ....and In The Rear Cut A Link Of Coil Of The Spring ...this Will Drop Ride Hight And Give A More Reclinded Feel ..the Last Idea Was A Theory Only But I Think It Will Work

[d-a-n]

Oh You Can See The Step By Step Prosedure At Pocket Bike Planet...for The Front Shock Install

[guy on the couc]

did you finish the swap successfully?

[d-a-n]

not yet , but don't worry ...i'm gonna take pics for yall....it's the least i can do.....!

[guy on the couc]

not yet , but don't worry ...i'm gonna take pics for yall....it's the least i can do.....!

right on :D and good luck. hope all goes well.

what make of engine are you using?

[d-a-n]

pre-she-ate-it ,guy on the coutch.... it,s a honda (make)xr-crf 50 cc w/ 3 speed (model) very torky :eek:

[guy on the couc]

pre-she-ate-it ,guy on the coutch.... it,s a honda (make)xr-crf 50 cc w/ 3 speed (model) very torky :eek:

when i saw the shifter i thought it was a 3 speed semi-automatic[no clutch required for shifting]

hell yea that rocks, a two-stroke as well!! :D fun fun fun.... :D

what about 80cc kits? will they fit in the engine on that frame?

[d-a-n]

actualy it's a four stroke ,3 speed w/o manual clutch..it idels in first gearor second or third untill you hit the gas ....but the big bore kits go far beyond 80cc...i think it tops out at 125 cc....not to mention after market turbos & ...superchargers........
////////
..........wwwwwwweeeeeeeeeeee! :D

[guy on the couc]

actualy it's a four stroke ,3 speed w/o manual clutch..it idels in first gearor second or third untill you hit the gas ....but the big bore kits go far beyond 80cc...i think it tops out at 125 cc....not to mention after market turbos & ...superchargers........
////////
..........wwwwwwweeeeeeeeeeee! :D

yea i know it gets bigger but will it all fit? i first started and grew riding on an 80cc yamaha quad that was semi automatic four stroke :D [my,my the good ol' days]

i thought xr's were 2 stroke, guess not ha! what year engine you using?

oh i see what i did i read xr-crf as xr and got excited. small case of selective reading :p

[d-a-n]

i got started on a honda 70 4 wheeler...i do miss those days (late 80's)....any way the engine is a 2002 0r 2003

[datalorr]

that looks like a C50 honda engine (cub50) in england they do a C90 (cub90) too the engines are the same size....... good idea 3speed NO clutch loads of torque

[d-a-n]

absolutely .......thanks for the feeds bsch homies keep em rollin :D

[Freezuzmice]

Thanks for the idea DAN. I'll go check the shock idea out.
I think I'm gonna wear the little 2-stroke out before I go cutting up the frame trying to fit the xr80 motor in there. Also, I think some improvements to the "suspension" would be wise to get done first.
Cheers!

The Frozen Rodent

[d-a-n]

yea your rite .....but i,m gone gitter dun !.......more pics enjoy

[d-a-n]

a few more

[blah]

Dan, you the man. it's looking so neat dude, well done.

[zameil]

Thats awesome, Good job.

[d-a-n]

NO YOU DA MAN..awww my heads so big its about to pop......i figured i would share the build so any one else interested in building one can ! , just ask and i'll do my best to answer any ? you have.... :)

[d-a-n]

But Naked

[guy on the couc]

is that sprocket bigger? looks like a mean lil machine. thats fu*ken sick :D how long did the swap take you?

[d-a-n]

too long theres a lot of machine work , cuttin , and welding not quite finished yet but within a week close to finishin....it's taken aproximatly 30 days ( 30 very excrushiating day )...thats for the wait any way.

[d-a-n]

--------------------------------------------------------------------------------

alright fellas...i got tired of waiting on the muffler , i talked to some one at hole shot motor sports ...they assured me it would be in by friday ?



SO , I POURED SOME GAS IN THE TANK ...KICK..KICK..ECT......NOTIN...I LOOKED AT THE LINES NO GAS ...TOOK OF THE FUEL CAP AND BLEW IN THE TANK TO PRESSUREIZE THE FUEL LINES....GAS STARTED SPILLIN OUT EVERYWHERE....S#$T...TOOK OFF THE EXTRA LINE IN THE X-1 TANK , LIKE A RETURN OR SUMTHIN ...ANY WAY ..PLUGED THE HOLE IN THE TANK , PUT AN EXTRA LINE ON THE CARB NIPPLE......COKED THE ENGINE ,,,KICK ,,SPUTTER,,,VROOOOOOM,,POP,POP,POW...SHE ROARD TO LIFE ...NOW I WON,T LEAD YOU GUYS ON , I LIVE IN A RESIDENTIAL NEIGHBOR HOOD , AND I RESPECT THAT .......SO I TOOK ONE QUICK RUN ...LET ME TELL YOU GUYS I THOUGHT I HAD WASTED A LOT OF TIME AND MONEY ,,,BUT NOT THE CASE ....IT WAS WORTH EVERY PENNY AND ALL THA TIME I SPENT ON IT ( AND STILL WAITIN TO FULLY COMPLETE ) THE BIKE GETS UP INSTANTLY AND IDLES IN GEAR.. .. I WILL DEFENETLY LET YOU ALL KNOW THE VERDIC ON PERFORMANCE FRIDAY HOPEFUL.........................KEEP YOUR FINGERS GROSSED !....

[d-a-n]

[ i'm finaly done but i'll only talk about the finished product if someone asks ! :bigl

[Ozscoot]

:cool:
[ i'm finaly done but i'll only talk about the finished product if someone asks ! :bigl

[d-a-n]

:cool:

TOO COOL MAN WELL THE THING HALL *** ...EXCUSE MY ENGLISH...LOL....IT IS A GREAT ALL AROUND BIKE HERES A NEW PIC IF YOU WANT MORE JUST ASK.

[2004x1]

heres a juicey morsal to sink your teath into ccchhheeezzzzzzzz


ITS MT PROJECT X-1 WITH 50 CC MOTOR SWAP !!!!!!!!
:bigl :bigl :bigl :bigl Looks nice but your gear shift is way off from where your foot peg is. You could have a street legal 50 but you wasted your time on a pocket bike that is illegal and a motor that won't run in any class if you plan to race it. :bigl :bigl :bigl And, with the new four stroke automatic three gear shift bikes out, you just wasted your time on that project X1. :bigl :bigl :bigl

[blah]

:bigl :bigl :bigl :bigl Looks nice but your gear shift is way off from where your foot peg is. You could have a street legal 50 but you wasted your time on a pocket bike that is illegal and a motor that won't run in any class if you plan to race it. :bigl :bigl :bigl And, with the new four stroke automatic three gear shift bikes out, you just wasted your time on that project X1. :bigl :bigl :bigl


Dan forget what this retard has to say, the people who count think your bike is a work of greatness. I see china has even copied it and there will be a class for your bike soon, no doubt, not that you need to race it to prove anything.

[d-a-n]

Dan forget what this retard has to say, the people who count think your bike is a work of greatness. I see china has even copied it and there will be a class for your bike soon, no doubt, not that you need to race it to prove anything.

thank you ....blah ...that jerk off would'nt know his *** from a hole in the ground....he's just mad cause if he tried to race me he would get the paint blown off of what ever pocket bike he brings....and i relly hate to burst his bubble but this bike will smoke the new 4 strokes commin out for !....in case you didn't notice that motor says HONDA....BIATCH. :nono

[disolve]

yeah dude who cares about races u can smoke all yer friends messing around on that *****. and the fmf exaust is siq. i wish i knew how to weld and had a lil motor sitting around like that to do the same.