*TUNING A CARB* help

[ninjax2]

how to u tune a carburetor to high end, such as turn the screw how many turns? like half? quarter or wut? what do u do to ur carb to make it have high end, the best choice or the best way of having high end?

[Freddie]

It's all trial-and-error until you find a decent setting that suits you, your bike, the mods to the bike, the track, the conditions, etc.
Not two bikes are ever the same due to the above reasons, not to mention your riding style and skill.
I know this wont help, but you have to do it yourself or ask someone from your track for help.
Good luck ;)

[mega]

It's all trial-and-error until you find a decent setting that suits you, your bike, the mods to the bike, the track, the conditions, etc.
Not two bikes are ever the same due to the above reasons, not to mention your riding style and skill.
I know this wont help, but you have to do it yourself or ask someone from your track for help.
Good luck ;)

i concur. track, enviromental conditions, and rider syle does make a difference in tuning your carb. btw, what carb are you running?

in my setup i use a walbro 668. if you have this, use the ada setup spec as your baseline. then with the HS needle, (depending on your mods), tune from there. the LS needle is just right (ada spec) you can lean it out a bit, if u want, but this may make your motor hard to start. hope that helps!