Brooks
01-07-2005, 02:06 PM
Now available a Walbro WT-603 carb kit for the 49cc mid-bikes.
Contrary to the believes of some, you cannot just bolt a WT style carb onto the stock 49cc intake manifold. The WT carb will not fully cover the slot in the stock manifold for the pulse hole. The new ADA Racing WT-603 carb kit comes with a billet aluminum adaptor plate that fully seals the pulse hole and correctly aligns the pulse holes in the WT carb and the stock manifold, preventing any chance of a air leak.
The complete carb kit is $59.95 and that includes a Walbro WT-603 carb, throttle linkage installed, return spring, 6mm nut, billet adaptor plate, velocity stack, gaskets, and bolts. You can get them here (http://www.adaracing.com/viewitem.php?id=pbhpck49-wt&maincat=pocketbike).
If you already have a WT style carb then you can get just the billet adaptor with gaskets here (http://www.adaracing.com/viewitem.php?id=pbia49-wt&maincat=pocketbike) for only $9.95.
Here are a couple of pics of the carb kit installed:
Contrary to the believes of some, you cannot just bolt a WT style carb onto the stock 49cc intake manifold. The WT carb will not fully cover the slot in the stock manifold for the pulse hole. The new ADA Racing WT-603 carb kit comes with a billet aluminum adaptor plate that fully seals the pulse hole and correctly aligns the pulse holes in the WT carb and the stock manifold, preventing any chance of a air leak.
The complete carb kit is $59.95 and that includes a Walbro WT-603 carb, throttle linkage installed, return spring, 6mm nut, billet adaptor plate, velocity stack, gaskets, and bolts. You can get them here (http://www.adaracing.com/viewitem.php?id=pbhpck49-wt&maincat=pocketbike).
If you already have a WT style carb then you can get just the billet adaptor with gaskets here (http://www.adaracing.com/viewitem.php?id=pbia49-wt&maincat=pocketbike) for only $9.95.
Here are a couple of pics of the carb kit installed: