G2D question

[pharaohoffarts]

Hi all. I was getting ready to put my g2d motor back together and I noticed that there was only 1 small washer on the crank. Is there only one or did I lose one? It's kind of hard to tell on the few exploded views I've been able to find. Thanks! :eek:

[pedhead7]

The only washer on the crank that Im aware is a lock washer found between the flywheel and the flywheel nut, on 1140 motors.

[pharaohoffarts]

This is a very thin brass (I believe) washer that goes up against the flywheel side bearing. I saw it on there when I took it apart but I'm not sure if there was one on the other side.

[firebush]

Dont really have a clue of what you are talking about... Only "brass" washer i know of is on the nut to hold on the flywheel.

[FastGSR40TSi]

There should be NO washers on the crank INSIDE the motor. You shouldnt have a brass washer or any washer on your crank at all. Your flywheel nut should have a spinning washer put on it.