47cc HP cluch help

[dac001]

i got a 47cc hp cluch i put it on the bike and started the bike but it just reves and no movement i tryed adjusting it but still dont work do i have to remove a scru or someithing any help world be grate...... thxs......

[pocketracr]

did you tighten the center bolt? and the weigh i think needs to be off set, i dont kno much about 47cc but it either is real loose, or you got ripped off on a phony clutch.

[kevin]

try putting the stock 1 in and see if it works then

[Beanscateye49]

is it an adjustible clutch? if it is just make the springs loser and it should work

[pocketracr]

isnt the clutch supposed to be offset? with a weight on one half so it will catch the piston drum? and create inertia (sp?) so the piston will cycle up and down to ignite? (lol wow i actually kinda sound smart?!?!!)

[dac001]

yes it a adjustible clutch . i have loseind springs and it moves just a little now. and i have teyed to the tighten the center bolt. i dont know what to do and what do u mean i ripped off on a phony clutch. thats what one of my frend sad. i hop not.. anymore suggestions would be grate... thxs

[pocketracr]

phony clutches, its easy to make a clutch LOOK like it will run.