BOMBCRU
08-31-2006, 05:58 PM
Giovanni 49cc pocket, on its last break in tank 50/1, air filter brand new.
Then it started stalling after it was turned off cooling off after a mile when it first started happening. First thing I noticed was it bogged out and would only idle, hit throttle again it would try to shut off. Then after readjusted idle and mixture to spec, i would go 10-100 feet and the throttle would just die and kept dieing after a short sprint weather i played with the throttle or not.
Sometimes it would catch itself at idle and could restart but would never go to its half its top speed, and then just die out of no where.
I?ve tuned it and leaned it way out seems to run better backed off 3 turns but after that it will not start at all without 1/8th turn of throttle, even after adjusting idle.
So today I mixed 25/1 with 93/112 50/50, had a lot more balls but after it warmed up started the stall on take off 10ft to 100ft max
I?m leaning toward carb is just a total p.o.s
Any idea?s? Don?t want to dump more money into this thing if I don?t have to. But im about to get a walbro carb and pray it fixes it if no one can help. Detailed intrustions would be best if at all possible
Then it started stalling after it was turned off cooling off after a mile when it first started happening. First thing I noticed was it bogged out and would only idle, hit throttle again it would try to shut off. Then after readjusted idle and mixture to spec, i would go 10-100 feet and the throttle would just die and kept dieing after a short sprint weather i played with the throttle or not.
Sometimes it would catch itself at idle and could restart but would never go to its half its top speed, and then just die out of no where.
I?ve tuned it and leaned it way out seems to run better backed off 3 turns but after that it will not start at all without 1/8th turn of throttle, even after adjusting idle.
So today I mixed 25/1 with 93/112 50/50, had a lot more balls but after it warmed up started the stall on take off 10ft to 100ft max
I?m leaning toward carb is just a total p.o.s
Any idea?s? Don?t want to dump more money into this thing if I don?t have to. But im about to get a walbro carb and pray it fixes it if no one can help. Detailed intrustions would be best if at all possible