Coast Peds Green Machine (gsr40)

[COAST_PED]

Here it is my green flybared gsr it has one of the craziest paint jobs ( really need to see it in person ) we have ever done and in true form it runs as good as it looks! The brake is a four piston billet caliper and the disc was custom made just for this bike. This brake is quite possibly the strongest brake in the bicycle industry and when you are going 60 mph. one thing is for sure you gotta stop sometime. The motor is one off meaning there is only one i have built and have plans to build more but work gets in the way of fun sometimes. All I can say is it is quite a thrill to go flying by cars on the road doing a wheelie. Well here are the pics i could find and lets just say for the list of mods .... i will tell you that all the Bling comes from ADA Racing and the Flybars ..well thats a given and the rear sprocket is PSWS and the motor all mine!! enjoy

[COAST_PED]

2

[COAST_PED]

3

[COAST_PED]

4

[COAST_PED]

5

[CBlakeNS]

That thing is awsome!!

Nice work Coast Ped.

[Stuntfoot24]

I like it ALOT because its DIFFERENT!!!! great job!! :)

[Slimcandy428]

Not running the Ada Gsr pipe? I found it to be alot stronger on top end, plus a 3rd powerband. And do I spy a reed?

[pedhead7]

Wheres that beast top out at?

[Kman]

Originally posted by pedhead7
Wheres that beast top out at?

Around 55 mph-60 mph.

[COAST_PED]

Well I have to say that I like the gsr pipe but the series 2 is my fav. plus everybody said it would not work right so I left it on just to prove it does!
As far as how fast it is it does 60mph ( actually 59.8 mph/garmin gps) The best part of it is it still pulls whellies out of the hole and you can ride wheelies in excess of 40 mph!!
And no that is not a reed cage....sorry

[Death]

Originally posted by COAST_PED
This brake is quite possibly the strongest brake in the bicycle industry and when you are going 60 mph.


Originally posted by COAST PED (taken from GPN post)
Green Flybared GSR passing speeds of 60 mph great low end and great top end (not a gsr60)

688 carb :dunno:
ada tall vstack
ada series 2 pipe :rockon: :lol:
9 tooth
72 psws sprocket :rockon:
stock clutch spring
stock timing
stock ignition
New prototype Kenda tires

Just a couple cc's bigger that everyone else :rolleyes:
LOOKS BONE STOCK loving that :dunno:

The stock ignition has a 12,500 RPM rev limiter, you're running 9, 72 gearing, you have 10" tires (like evrybody else). Do the math... you literally can't be going any faster then 46.475 mph. Please explain this.

GPN thread: click here, scroll down (http://www.gopednation.com/vb/showthread.php?s=&threadid=114762&perpage=15&pagenumber=2).

[Jeff23]

Death it is his machine so he knows what hes talking about. Please just shut up.

[CBlakeNS]

Wow, what a fast machine if it does 59..

[Death]

Originally posted by Jeff23
Death it is his machine so he knows what hes talking about. Please just shut up.

Am I flaming anybody? I asked simple question and I just want to hear what he has to say about it. :rolleyes:

[adasupporter]

good question....Stock means stock ... never said what it came on stock...other coils are availble and work they came stock on something right.... :D


btw :rolleyes: you are a new member and have no info about you and strangely enough you only have two posts they both are on this thread....sounds like a coast ped hater is in the mist???? :nono :rolleyes:

[propedder]

Although I have much respect for Coast Ped I find a bit of the information you posted completely false. The disc brake caliper and rotor are manufactured, not one-offed, by Hope. The model of the brakes is the m4 and pictures of that setup, including that particular rotor, can be easily located on Google. The mount is custom but those brakes can be purchased by anyone. Nice color!

[COAST_PED]

Yes and no...the brakes are from hope and so is the rotor however the rotor was custom made by a shop here in oc after the hope design...hope does not offer that rotor anymore ...so yes and no
Thanks for the props!

adasupporter is right.....:D

[Death]

Originally posted by COAST_PED
adasupporter is right.....:D

Bah... stock RC ignition isn't the same as a stock ignition (wrong engine).

Whatver, I'm over it...


Originally posted by adasupporter
btw :rolleyes: you are a new member and have no info about you and strangely enough you only have two posts they both are on this thread....sounds like a coast ped hater is in the mist???? :nono :rolleyes:

I have nothing against coast ped.

This (60mph g43) has been brought up at a couple GPN threads and someone posted the link to this thread. I thought I would post my thoughts and try to get an answer. Calm down... I'll probably never post here again.

[COAST_PED]

Who said it was a G43?

[TK Boxer]

As a respected motor builder you are, I always try to read about what you are building. I saw on GPN a post where you said it was sligtly bigger in CC's than a stock g43.

I'm really cerious about whats done to that motor.

After looking at the pics it sure does look like the motor has a reed valve but you say it doesn't.

My guess is that you fitted a different cylinder on the motor.

Care to at least give out how many cc it is?

Anyways that scooter is a 10 out of 10.

BTW I love the red GSR Ruby you made. http://djsqiigles.freewebspace.com/photo.html

[COAST_PED]

tk boxer check your pm

[Stuntfoot24]

*Thread is getting out of hand* :confused:

[bmt49]

It's called "Green" ;) with envy Stuntfoot. People have a tendency to covet what they can't have. What keeps this thread hot and spicy is what they........don't know, and probably never will. Like the formula for Coca-Cola or Bush Baked Beans, highly guarded information, which makes for good business.

[Go-GhEtTo]

its that paint flat or does it have a gloss to it...? anywayz nice ped it clean as hell

[supra8215]

kid around the street from me has a gsr40 ported and has a pipe and some other stuff....it leaves moddied orcs with pipes with ease....so i believe it

[Sick Shift]

Originally posted by supra8215
kid around the street from me has a gsr40 ported and has a pipe and some other stuff....it leaves moddied orcs with pipes with ease....so i believe it

A bone stock TSi can take a piped bored rc bigfoot.

[pedhead18]

is it a zenoah g45 cylinder? by the looks of the way the carn and airfilter is slanted thats what im thinking. is that the extra cc's?

here is a pic of the g45. notice the slanted carb.

[Sick Shift]

The green machine has offically retired. It has been parked in the garage....

[bmt49]

Originally posted by Sick Shift
The green machine has offically retired. It has been parked in the garage....


:nono :nono WTF you talkin bout boy. My scooter, your scooter, everybodys scooter is parked in the garage when we are not riding them. Don't mean they are........retired. Maybe it is time for a 30k, but it will be back ;)

[COAST_PED]

Yes Allen is right it is parked in the garage and for now it has been "mothballed" and Brian you are too right it does need a 30k service. so for now it will stay parked and I have allready replaced it with a (less colorful) gsr40....true 40 this time nothing fancy but gets the job done.....Nightrain! Time to go night riding so the pretty and the fast get parked and the not so fast (not slow) gsr40 comes out with lights and such to go play in the "canyons" so be green or be jealous the "green machine" be parked for now......

[COAST_PED]

borrowed my friends camera...(way better than mine) so hear it is...

[sick-fast]

nice, they came out pretty good. check my avatar :D

[Sick Shift]

Originally posted by COAST_PED
borrowed my friends camera...(way better than mine) so hear it is...


For all of you non-believer's here it is, care to disagree with THIS now?