Save 10% on orders $50 or more @ ADA Racing
Save at www.adaracing.com by using the coupon code: bb10
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I just bought a 15mm Walbro Carb from ADA and i installed it, and my bike isn't starting .... i have spark and the fuel goes all the way to the carb but doesn't seem to get threw it. What should i do??? THANKS
I just bought a 15mm Walbro Carb from ADA and i installed it, and my bike isn't starting .... i have spark and the fuel goes all the way to the carb but doesn't seem to get threw it. What should i do??? THANKS
I have the same problem. My carb gets Gas from the tank but it doesn't look like it is flowing from the carb! I use the prime pump and gas get's pumped through the fuel lines but thats about it. Nothing comes out from the carb. I'm going to try and take it appart and see if I something is clogged in it.
Also, one of my mixture screws is way too long! It hits the throttle cable and wont let the throttle open all the way or close.
Comment