top end

[Lhudgins1968]

Hello ADA Tech,Can you help me again on some thing.
I have a GS-372-05 47cc p.bike ,i install a ADA hp Carb,a ADA air filter.a NGK BPM7A plug and a hp exhaust pipe.and also put on a dieo. machaine and it is stall running poorly on top end what can i do now to help this,can it be my ratio (my gas mix)my gas mix is 40:1 now and a lot of smoke still come out of the pipe,and a oil film in side of the pipe.
thank you for your time,
LHUDGINS

[mega]

you might me running a little rich @ WOT (wide open throttle) since youhave the HP carb, and since you said you are having lots of smoke and oil film, thats a sign or running rich. turn down your high speed adjustment about 1/16" to 1/8" turn (close) to lean out the A/F (air fuel mixture) at WOT. this should reduce or eliminate WOT bog. hope that helps.

[AZTIG]

ADA TECH!!! i just bought ur juice box after i used it for like 5 hours driving it leaks....why is that????????

[mega]

ADA TECH!!! i just bought ur juice box after i used it for like 5 hours driving it leaks....why is that????????

check your gaskets. remove and see where the leak is from.

i don't have a juice box on mine, but it seems if its leaking, its prob from your gaskets. try using gasket sealer along with the gaskets supplied. that should take care of the problem.

(btw, im not a tech ) checkout pocketbikeplanet.com forums, lots of info on mods etc.