Announcement

Collapse
No announcement yet.

cant get it started...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cant get it started...

    have a super pocket bike, had airbrushed ghost flames on the body, and now i cant keep it running, once it starts have to keep the rpm up to stay running,
    (half throttle) , can ride around but if u stop have to keep revving, checked spark, loose carb/pipe for air leaks, plug looks ok? getting fuel checked cap for breathing, and checked out filter in tank for any blockage including lines...
    but i still have the chinese plug in place only ran for about 30 hours total, what plug would fit (champion)? what... only thing that it comes down to, but if u were to check spark nice blue flame emmits gap at.023 please help a guy out, bran new and i cant drive it...............

  • #2
    Originally posted by RAYSNHL
    have a super pocket bike, had airbrushed ghost flames on the body, and now i cant keep it running, once it starts have to keep the rpm up to stay running,
    (half throttle) , can ride around but if u stop have to keep revving, checked spark, loose carb/pipe for air leaks, plug looks ok? getting fuel checked cap for breathing, and checked out filter in tank for any blockage including lines...
    but i still have the chinese plug in place only ran for about 30 hours total, what plug would fit (champion)? what... only thing that it comes down to, but if u were to check spark nice blue flame emmits gap at.023 please help a guy out, bran new and i cant drive it...............
    adjust your carb its too low adjust the cross screw turn it to the right and the spark plug u need is ==ngk bm6a =thats what i use in my X-2 and the gap on the spark plug should be between .06-.07
    Last edited by PRIME; 08-31-2004, 02:54 PM.

    Comment

    Working...
    X