Pocket bike rebuilding

[gotojimbo]

hey guys,
If you are in Australia (Queensland) and need any work done to your pocket bikes i can help, i can do everything from rebuild your pocket bike replacing every nut, bolt, bearing, gasket, crank seals, adjust brakes, etc etc. to fully modify the engine i e balanced, blueprinted, ported, c4 crank bearings, all balls seals. specialising in fixing running problems, i can guarantee to get your motor running reliable. so far i have rebuilt 4 engines and not one has had a problem since. (most of the crank seals are not sitting right in the cases and the crank bearings are meant for an electric motor spinning at 3000 rpm not 10,000 rpm c4 bearings are used in all 50-125cc race dirtbikes) anyways if you want to get work done or your engine just rebuilt give me a buzz 0422446550 [email protected] average re-build is $100-$150 including cranks seals, crank bearings, gaskets, and all labour, all bolts are thread locked in. average turn around on motor 2 days to 1 week max

[blah]

....c4 bearings are used in all 50-125cc race dirtbikes

ahh, we pull them out and put c5's in

[gotojimbo]

c5's i can't even get c5 bearings here, are they just made to handle a bit more heat expansion? also how much would a c5 cost?

[zameil]

$35.00 for 4 at bearing services in Southport .

[gotojimbo]

cool thanks zam i will order some (how is your ada carb going), so who is the law on your pocket bike? damn thats funny.
hey does anyone have a frame they want to sell i snapped mine in two

[zameil]

Thats a senior sergent of traffic lol
Hit me up I can get you a frame
You still got my numbers?

[Terror]

gotojimbo, Just weld it up!
I screwed my frame and just welded it up no probs...

[gotojimbo]

hey i tried to get it welded but it has cracked at the new welds already, looks like i am up for a new frame hey zam whats your number dude, also i get my race motor back on monday all blueprinted, ported/ polished, and balanced. i will let you guys know how it goes. also has anyone noticed that the 36cc? engine has 2mm larger cases. and better shaped transfers.

[Freddie]

Getting you race motor back???????? I thought you said you did it all yourself!!!

hey guys,
If you are in Australia (Queensland) and need any work done to your pocket bikes i can help, i can do everything from rebuild your pocket bike replacing every nut, bolt, bearing, gasket, crank seals, adjust brakes, etc etc. to fully modify the engine i e balanced, blueprinted, ported, c4 crank bearings, all balls seals. specialising in fixing running problems, i can guarantee to get your motor running reliable. so far i have rebuilt 4 engines and not one has had a problem since. (most of the crank seals are not sitting right in the cases and the crank bearings are meant for an electric motor spinning at 3000 rpm not 10,000 rpm c4 bearings are used in all 50-125cc race dirtbikes) anyways if you want to get work done or your engine just rebuilt give me a buzz 0422446550 [email protected] average re-build is $100-$150 including cranks seals, crank bearings, gaskets, and all labour, all bolts are thread locked in. average turn around on motor 2 days to 1 week max

[gotojimbo]

no i never said i do it "all" myself,i do all the porting and polishing and building but i get my gear balanced and blueprinted at a proper motox engineering centre. i would never attempt to blueprint and balance myself. sorry if you misunderstood.