Tweet
This scooter is in about as good of condition as a used scooter can be in without it being new but as of now the motor is pulled. The motor mount bent and a few screws sheered of in the case. As of now here is what it has.
2004 Super Foot with Brand new in package ADA 3rd bearing support with SBF adaptor.
PK IS break adaptor polished
ADA series 2 pipe with pro Flow and the extra strong Steal DDM BF pipe mount
Sikk 27cc BBK
Sikk 1mm Stuffer stroker crank
The rest of the Motor is all Factory Zenoah BUT REMEMBER IT HAS BROKEN CASES.
Bridgestone Racing Street tires, the sticky compound
UDI Lock Jaw Grips
New style break rotor
Tektro break lever
2 Spindles 675, and 750 both aftermarket
MLC 3rd support which would be extra because it now has the ADA 3rd support.
Scooter Pro?s Forced Air
Here is what you will need to get this thing going again: 1st new cases, 2nd gasket set because you have the motor apart. 3rd this is not needed but if you want to use the PK IS adaptor you will need to purchase the ADA mechanical break caliper from DDM. It sells for $24.
I?m asking $625 for everything.
E mail [email protected]
2004 Super Foot with Brand new in package ADA 3rd bearing support with SBF adaptor.
PK IS break adaptor polished
ADA series 2 pipe with pro Flow and the extra strong Steal DDM BF pipe mount
Sikk 27cc BBK
Sikk 1mm Stuffer stroker crank
The rest of the Motor is all Factory Zenoah BUT REMEMBER IT HAS BROKEN CASES.
Bridgestone Racing Street tires, the sticky compound
UDI Lock Jaw Grips
New style break rotor
Tektro break lever
2 Spindles 675, and 750 both aftermarket
MLC 3rd support which would be extra because it now has the ADA 3rd support.
Scooter Pro?s Forced Air
Here is what you will need to get this thing going again: 1st new cases, 2nd gasket set because you have the motor apart. 3rd this is not needed but if you want to use the PK IS adaptor you will need to purchase the ADA mechanical break caliper from DDM. It sells for $24.
I?m asking $625 for everything.
E mail [email protected]
Comment