Announcement

Collapse

General Forum Rules

This forum is open to all brands and aftermarket products.


No flaming or insulting other members, everyone is entitled to their own opinion.


Treat others how you want to be treated. If you do not have anything nice or productive to say, then don't say anything at all. Remember, you are interacting with real people and if you wouldn't say it to their face, then you probably shouldn't type it. Don't be a keyboard warrior!


No profanity. Dropping f-bombs doesn't make you cool.


Absolutely no obscene or pornographic content is allowed

Please post in the appropriate sections

Do not email, PM, call, or carrier pigeon etc. ADA Racing or admin with complaints about bans or Billetboard drama. If you were banned, it was for a reason and we're too busy to deal with those kind of complaints. If you have an issue with a moderator, please PM said moderator or any of the other moderators and if they have time to address it they will. Remember, we offer this board as a service to the community and it is a privilege to be on here, not a right.

Any member violating the above rules will be banned

These rules may be updated at any time
See more
See less

***DS-60 GSR60 adapter pics and info***

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Badazzx22
    replied
    Can't wait to see how this beast runs should be really good since its running on the right way

    Leave a comment:


  • Badazzx22
    replied
    Looks very nice and clean

    Leave a comment:


  • dsport
    replied
    D8A264BC-12FE-4B86-A2F5-37C745B9DE86.jpeg 755A18F6-5B26-4CB8-B5E7-A16A0A326647.jpeg A couple pics of the DS with all the accessories fitted...someone was asking about spark plug clearance with the Jetpro, it looks really good. This one has custom mounts.
    Last edited by dsport; Today, 12:46 AM.

    Leave a comment:


  • dsport
    replied
    Originally posted by snapondick View Post
    Got mine in the mail! Pretty sweet setup! Thanks for all the work to make this available!
    Heck yea, good to hear!
    Also, something to note if you do go the Jetpro pipe route. Extend the intake side fan cover pipe mount also, and you’ll have tons of plug clearance.
    Last edited by dsport; 09-21-2020, 09:51 PM.

    Leave a comment:


  • snapondick
    replied
    Got mine in the mail! Pretty sweet setup! Thanks for all the work to make this available!

    Leave a comment:


  • Badazzx22
    replied
    but yah most of the 460 pipes should work beside the motor mount part with the bracket. the fan cover side should be fine abut yah 😉

    Leave a comment:


  • Badazzx22
    replied
    That was the only pipe I had at the moment so I put it together works very well with the mb manifold the stock 460 manifold works as well i just had the part at the time....but after a few months of riding I got the chance to buy a rs pipe for a good deal now this motor runs and sounds very mean with the rs pipe

    Leave a comment:


  • Badazzx22
    replied

    Leave a comment:


  • Badazzx22
    replied
    Originally posted by snapondick View Post
    Not sure the Jetpro Rhino will clear the the rear facing spark plug but we'll find out,
    I did try running a jetpro pipe on it it will clear it but it was very close to the spark plug

    Leave a comment:


  • snapondick
    replied
    Not sure the Jetpro Rhino will clear the the rear facing spark plug but we'll find out,

    Leave a comment:


  • dsport
    replied

    Originally posted by Basement Cat View Post
    My man keeping the crank going the right way!
    Nice kit!
    Thank you sir

    Originally posted by snapondick View Post
    Is there an existing pipe that fits this configuration since most others have exhaust facing rearward? Thanks.
    Pretty much any 460 exhaust, just take your pick. You’ll need to oblong the mounting holes a little, or buy an 460/60 oring mounting flange, you can also message Jetpro and he’ll sell you a 460 rihino with 60 mounting flange. For mounting, the two fan cover brackets will fit, you’ll have to extend the clutch side mount.
    Last edited by dsport; 09-19-2020, 01:53 PM.

    Leave a comment:


  • snapondick
    replied
    Is there an existing pipe that fits this configuration since most others have exhaust facing rearward? Thanks.

    Leave a comment:


  • Basement Cat
    replied
    Originally posted by dsport View Post

    intake faces rear. I should be putting a build together this weekend.
    My man keeping the crank going the right way!

    Nice kit!

    Leave a comment:


  • dsport
    replied
    Originally posted by rayrayebh22 View Post
    So the cylinder is flipped?
    intake faces rear. I should be putting a build together this weekend.

    Leave a comment:


  • rayrayebh22
    replied
    So the cylinder is flipped?

    Leave a comment:

Working...
X