hp carb tuning

[alcholped]

man im haveing some problms with my hp carb. i had it on my goped a few months ageo and it worked perfectly and i took it off and it sat in my buddys garage for a little while now i place it back on another sport and i cant get te top end right.its just acting like a dog!can some one help me out with it and maby give me the factory settings.

thanks tim

[pedhead7]

Did you put a Gasket on?

[Slimcandy428]

1.5 L 1.25 H Check the above post first^ Then reset the carb.

[CBlakeNS]

Im taking its a rc motor?? hp carb?? I set my settings to 1 1.4 out on each needle and fine tune from here, and my motors always run like a champ.

[alcholped]

no its an lh i have a gasket and ill try the factory settings im gettin really mad iv messed with it so much and i just wont budge i might just save up for a new one

thanks

[ScReWeDuP]

1 turn on both jets.

[Slimcandy428]

Originally posted by ScReWeDuP
1 turn on both jets.

FYI thats really lean to start off with. Just about every motor (not race motor) will run about 1 1/2 low and anywhere from 1 to 1 1/4 You always want to start on the rich side then lean it out as needed. or if the motor wants tons of fuel, you won't be starting out to drastically lean.