Announcement

Collapse
No announcement yet.

Express Peds Dyno Results

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Express Peds Dyno Results

    Check out some dyno results from Express Peds in Virginia Beach.



    Looks like Bob has been busy!
    Brooks @ ADA Racing
    Facebook, YouTube, eBay, Twitter
    Use Coupon Code: 'bb10' to $ave!

  • #2
    I don't want to come and here and be seen as being negative. But i do not see those results as even close to accurate. The control elements are lax, at best and for some reason the engine is being dyno'd on an imaginary load of a chain gearing system and a dyno drum!

    I will look forward to the corrected (full information) release, but even then will be looking closely at the numbers.

    Comment


    • #3
      Actually, a rear wheel dyno gives real world results. Does your ped have a wheel? Or not?

      And why don't you see those results as acurate? Because they are not what you want to believe? Maybe you should do some dyno testing of your own.

      Btw, I've always wondered, how old are you?
      Brooks @ ADA Racing
      Facebook, YouTube, eBay, Twitter
      Use Coupon Code: 'bb10' to $ave!

      Comment


      • #4
        A good tool for pipe shoppers. They shoulda thrown the GSR pipes on there too, oh well.
        COAST PED

        Comment


        • #5
          Originally posted by Brooks
          Actually, a rear wheel dyno gives real world results. Does your ped have a wheel? Or not?

          And why don't you see those results as acurate? Because they are not what you want to believe? Maybe you should do some dyno testing of your own.

          Btw, I've always wondered, how old are you?
          Oh course my ped has a rear wheel, but that is not the point. All dyno graphing up until now has been conducted in-line with all other scale engine testing. Being, no rear wheel load, no air filter and controlled ambient air. The dyno completed by expresspeds seems to go against all that, providing information that is not complete which confuses people who are not familiar with the complete graphing of diagnostic information.

          I do not see the results as accurate because the actual information which is used by people who look at graphs for more than they interesting colors is not provided. The data points provided in the expresspeds dyno testing lacks the entire dyno graph and curve, and without that the points are essentially just wild numbers. I am not saying the dyno information carried out by expresspeds is of no use, it is. It is to people who want to just look at some final output numbers, and disregard usable power, and the RPM at which it engages.

          I myself lack the equipment, and experience to dyno test anything as it simply is not my area of expertise, and any attempt i make would surely be flawed in some if not multiple areas.

          I am 19 atm, and turn 20 in Augest of this year. I find ADA to be a tad double-bladed towards me at times (not directly you) as i own and use multiple ADA products all the time, but seem to get the short straw as a customer.

          This is the dyno associated with Expresspeds:

          And this is the dyno associated with ROCRP, the same as used by 99% of all other scale engine dyno information.
          Last edited by wimmig02; 04-20-2004, 11:49 PM.

          Comment


          • #6
            It doesn't matter if it is rear wheel horsepower or horsepower measured at the crankshaft, as long as all tests are done the same. A dyno is a tool used for comparison testing, and that's it. You could use 3 different dynos of the same type and get 3 different results.

            I don't see how anyone could complain about Express Peds doing a test. I believe this is the first time a 3rd party has done an unbiased dyno test on pipes. Just because they didn't give you the results that you wanted or in a format that you wanted, don't be negative. It is better than nothing.

            Btw, I would like to know what ADA Racing has done towards you, as you seem to imply.
            Brooks @ ADA Racing
            Facebook, YouTube, eBay, Twitter
            Use Coupon Code: 'bb10' to $ave!

            Comment


            • #7
              Originally posted by Brooks
              It doesn't matter if it is rear wheel horsepower or horsepower measured at the crankshaft, as long as all tests are done the same. A dyno is a tool used for comparison testing, and that's it. You could use 3 different dynos of the same type and get 3 different results.

              I don't see how anyone could complain about Express Peds doing a test. I believe this is the first time a 3rd party has done an unbiased dyno test on pipes. Just because they didn't give you the results that you wanted or in a format that you wanted, don't be negative. It is better than nothing.

              Btw, I would like to know what ADA Racing has done towards you, as you seem to imply.
              Your right! It is me being picky that has created all my here-say, and for that i apologise. Still, i look forward to the full graphs being supplied as expressped's has already indicated. The results are exactly what i wanted, and i know that under riding conditions i prefer my lineup as i current setup.

              The other topic of what ADA or reps/associates/friends of has said can be followed via email if you so wish. My profile email is the one to persue if so desired.

              Comment


              • #8
                nice

                That's cool, BROOKS! I've never seen anything like that before? Thanks for posting that up, it answers alot of questions that've been bothering me for awhile.

                p.s. I hope that you don't mind me being here Brooks. Wimmeg02 said that nobody wants me here. If that's true, I'll leave here, you guys have a darn good thing going here & wouldn't want 2 "ruin it" BTW-those spinnerz are DOPE! (sorry, where do I email the link to my site/forum?) thanks again!
                "you'll never stop me!" -nbmracing.com

                Comment


                • #9
                  Originally posted by NBMracinG
                  p.s. I hope that you don't mind me being here Brooks. Wimmeg02 said that nobody wants me here. If that's true, I'll leave here, you guys have a darn good thing going here & wouldn't want 2 "ruin it" BTW-those spinnerz are DOPE! (sorry, where do I email the link to my site/forum?) thanks again!
                  Nobody wants you here? No no, that's Wimmigs opinion.
                  Ada All the way.

                  Comment


                  • #10
                    Where they are doing the dyno thing, thats my local ped place!! Pretty cool with the new ideas they are coming out with each and every day.

                    Also to wimmig, hes a good guy but ive seen him being negative towards things on post, but thats his own opinion, and im glad that he saw that he was being negative!

                    Anyways I still think your a good guy wim!!!

                    Comment


                    • #11
                      Originally posted by NBMracinG
                      p.s. I hope that you don't mind me being here Brooks. Wimmeg02 said that nobody wants me here.
                      Everyone is welcome here, as long as they are civil and can respect the opinions of others.


                      Originally posted by CBlakeNS
                      Also to wimmig, hes a good guy but ive seen him being negative towards things on post, but thats his own opinion, and im glad that he saw that he was being negative!

                      Anyways I still think your a good guy wim!!!
                      I think it's all of the blood that is rushing to his head from being 'upside down' in the land down under.
                      Brooks @ ADA Racing
                      Facebook, YouTube, eBay, Twitter
                      Use Coupon Code: 'bb10' to $ave!

                      Comment


                      • #12
                        Can't believe people are still nice to me. I was a bit hot headed over the topic, mainly in relation to NBMRACING and those images he posted all over GPN... but that's over (i hope) and i will do the mature thing and quiet down a bit.

                        Comment


                        • #13
                          Originally posted by wimmig02
                          Can't believe people are still nice to me. I was a bit hot headed over the topic, mainly in relation to NBMRACING and those images he posted all over GPN... but that's over (i hope) and i will do the mature thing and quiet down a bit.
                          Its no big deal your still a good guy!! Keep posting your opinions man!

                          Comment


                          • #14
                            Man!! I feel a group hug coming!

                            Comment


                            • #15
                              Wow 10-30-2003 was the last time i visited.

                              btw toymakers, funny
                              g260rc and big bore head kit w/15:1 ,ser.1,ada race deck,supior handlebar kit,prowler rims.

                              Comment

                              Working...
                              X