Tweet
I just installed a Big bore on my ped that has a 2mm Superior stroker, .712 spindle and Ada s2. I can't comprehend on how bad *** this thing is and im still breaking it in! Low end even before the powerband is incredible at 3/4 throttle. Im running 2 stacked gaskets (soon to use one 40 thous base gasket) and I have 17thous squish. I can't wait till I can open her up. Moral of the story: 34mm 4 port is the way to go.
-
Ada All the way. -
what do u use for proper cooling, i have a big bore on my ORC with a ADA 1mm stroker and ADA S1 pipe
[email protected]
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rims -
I am getting an ADA Billet side cover and something along the lines of an ORC flywheel.Originally posted by Masta Z 88
what do u use for proper cooling, i have a big bore on my ORC with a ADA 1mm stroker and ADA S1 pipe
Ada All the way.Comment
-
no cool head or anything of that nature?[email protected]
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
Nah because I know how to tune and take care of my engine.
If I ever get a cool head it will be because it looks good.
Ada All the way.Comment
-
nice, i think ill just get my rc flywheel and that SRE SUpercooler for help[email protected]
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
Word, Mike.... thats honestly all it takes. A good tuner. Double sided flywheel and alky dont hurt thoughOriginally posted by Slimcandy428
Nah because I know how to tune and take care of my engine. If I ever get a cool head it will be because it looks good.
PH33R_T3H_R33DComment
-
Yep, I love my ADA 1mm stroker crank. Tom always *****es about how badly the ADA strokers suck and how god-like the meyer strokers are
.
Comment
-
Hey mike, i'd imagine that bigbore is ported, cuz if it isn't, then get it ported!!Comment
-
Wohaa, just thinkin of all the torque, get a reed cage, run a 167 carb, and switch to a .650!! Geez! That would be the torque king.
Comment
-
Nope, I don't have the time, I will eventually though.Originally posted by gopedder13
Hey mike, i'd imagine that bigbore is ported, cuz if it isn't, then get it ported!!
A reed would be overkill for me atleast and besides, id rather put my money into my Gsr. Im running a 167 already.Originally posted by gopedder13
Wohaa, just thinkin of all the torque, get a reed cage, run a 167 carb, and switch to a .650!! Geez! That would be the torque king.
Ada All the way.Comment
-
John, you've gotta remember, Tom likes little boys. ADA's cranks are great, screw half circle.Originally posted by Accord
Yep, I love my ADA 1mm stroker crank. Tom always *****es about how badly the ADA strokers suck and how god-like the meyer strokers are.
PH33R_T3H_R33DComment
-
those are a pretty good team on a ped!AiM: Sir Chinkal0t
Geo X Ped w/ xt pipe, kn filter, hp carb, .750 spindle, and a tank relocator. selling for $500+shipping
soon to have an x ped...Comment
Comment