Tweet
Hi, i have a old style ada 1mm, it is one of those that first came out, and i am wondering if they still give the same performance and last a long life, i am wondering if they are just as good, please post responses
thanx
thanx
-
Moderator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rims -
If I understand correctly they are a bit weaker but lighter.Ada All the way. -
Yes, they are just as good, but a different design. But, we never made +1mm billet strokers. They all were +2mm billet strokers. And yes, they were heat treated, just not as hard as the new Superior strokers.Comment
-
Brooks, You dont happen to have any pics of the old billet crank do ya? MastaZ: Im starting to think you dont have a stroker. How many gaskets were below the cylinder when you took it apart??Ada All the way.Comment
-
1/3Moderator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
2/3
so much better with 30 sec ruleModerator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
3/3
plz helpModerator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
Here is the ADA billet stroker:Comment
-
so u NEVER made a 1mm, Loctite98 on GPN bought this 1mm and said it is the old ADAModerator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
I can't really tell if you have a 2mm. Maybe he is mistaken that its a 1mm. Does the crank in your motor look like the one that Brooks posted??Originally posted by Masta Z 88
so u NEVER made a 1mm, Loctite98 on GPN bought this 1mm and said it is the old ADAAda All the way.Comment
-
this dont sound goodOriginally posted by Slimcandy428
I can't really tell if you have a 2mm.
when i took my cylinder off, there was only ONE gasketLast edited by Masta Z; 03-27-2003, 12:24 PM.Moderator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
Nope, we never made a +1mm stroker. Does your crank look exactly like the pic I posted? Is it a full circle with the holes through it? If it doesn't look exactly like that one, then it is not an ADA stroker.Comment
-
can anyone tell if i have the stroker crank? through the picsModerator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
-
You tell us.Originally posted by Masta Z 88
can anyone tell if i have the stroker crank? through the picsAda All the way.Comment
-
heh, i found out its a Meyer, here are pics, its heat treated and everythingModerator@GPN
100% A - m - e - r - i - c - a - n -~- M - u - s - c - l - e
2002 Super X Ped w/
-G230RC, BBK, Meyer 1mm Stroker, ADA S1, TGN chrome fancover/scoop, tgn chrome shroud, tgn flame filter, HP Carb(Wa 167), .800 long drive, ADA Chrome 3rd bearing, ET Stem, ADA 16" Bars, Chrome Slidetube, Steel FTG, Lexan Deck, GetAPed Red Tank skin, Competitor rimsComment
Comment