Announcement

Collapse
No announcement yet.

How fast

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • How fast

    How Fast will I, 15yr old 109 lb rider go with, g260rc Ada s1 pipe/ Ada Air filter/ Hp carb- Or 603 carb depending on money / 750 spindel.. Go... I' think 30-35/ And possible Juice Box if i buy one

  • #2
    Still too many variables.

    Do a speed trap or use a Gps.
    Modded out Super x ped, G2d xped,
    Modded out Yamaha wave blaster, and a Stock Yamaha wave raider.
    Ride Yamaha

    Comment


    • #3
      260rc

      the most recent 260rc i built did 35.2mph .725 spindle with just the crank case match ported.with a 180lb rider.that was measured with my gps.
      HOLLISTER RACING Phoenix,AZ
      Amsoil Dealer
      Flowsystem Racing Dealer-north west Phoenix

      Comment


      • #4
        ya aha a g260 with a 850 would do 35 maybe
        he23hp longblock, hp carb,tgn filter ,sikk 1 pipe,rokit key,polished everthing

        Comment


        • #5
          Originally posted by blingslowped
          ya aha a g260 with a 850 would do 35 maybe
          actually SRE (Jon) was doing about 32 mph with a stock spindle, g26orc engine, proflow, and a modified ada s1 pipe. the goal for the day was to reach 18,000 rpms for the day with trying different roc pipes, an s1 pipe, and his own custom s1 pipe. we finally did achieve 18,000 with the custom s1 pipe. Iwish.... you will be doing somewhere between 30 and 35 mph if properly tuned.

          Comment


          • #6
            biggger spindle does`nt allways mean faster

            Originally posted by blingslowped
            ya aha a g260 with a 850 would do 35 maybe
            you see the real trick is not to put a bigger spindle to make it go faster it`s really making the engine turn more rpm because a big guy like me (i weigh 239 currently)will not reach the top potential rpm with a big spindle like an .800 + so what i do is modify the inturnal parts and run a small spindle like a .700 my engine turns 18,120 rpm at 32.4 mph with me on it.
            HOLLISTER RACING Phoenix,AZ
            Amsoil Dealer
            Flowsystem Racing Dealer-north west Phoenix

            Comment


            • #7
              CORVETTEJIM1968

              Is your name Jim? And how do you know about the Minikart forum? Are you one of Rob's Buddies?????
              Actually Ive gotten my rc up to 30 Flat with Just a .750 Spindle and a Stalker exhaust. If you run good gas,good oil, get the right spark plug and Tune your Motor Right you can get it to Just Scream. I weigh about 205......
              Im not shure what its running now with a few other things, but a Piston Ring only last me about Gallon of Gas.
              Modded out Super x ped, G2d xped,
              Modded out Yamaha wave blaster, and a Stock Yamaha wave raider.
              Ride Yamaha

              Comment


              • #8
                jim

                Originally posted by pedhead7
                CORVETTEJIM1968

                Is your name Jim? And how do you know about the Minikart forum? Are you one of Rob's Buddies?????
                Actually Ive gotten my rc up to 30 Flat with Just a .750 Spindle and a Stalker exhaust. If you run good gas,good oil, get the right spark plug and Tune your Motor Right you can get it to Just Scream. I weigh about 205......
                Im not shure what its running now with a few other things, but a Piston Ring only last me about Gallon of Gas.
                yes this is jim and i helped create the a.m.r.a. myself,rob,chip and dave are the 4 board members and minikart.com is our web site.thats too bad on the ring because i run my rings for about 5 months or so.
                HOLLISTER RACING Phoenix,AZ
                Amsoil Dealer
                Flowsystem Racing Dealer-north west Phoenix

                Comment


                • #9
                  Actually I created my username on there a long time ago................
                  Im rayman334. Im trying to think if I ever met you.......
                  Do you ride peds or just quads?
                  Modded out Super x ped, G2d xped,
                  Modded out Yamaha wave blaster, and a Stock Yamaha wave raider.
                  Ride Yamaha

                  Comment


                  • #10
                    Originally posted by pedhead7
                    Actually I created my username on there a long time ago................
                    Im rayman334. Im trying to think if I ever met you.......
                    Do you ride peds or just quads?
                    i ride both thats my ped in the avatar i also run hollister racing i modify these engines for ped riders
                    HOLLISTER RACING Phoenix,AZ
                    Amsoil Dealer
                    Flowsystem Racing Dealer-north west Phoenix

                    Comment

                    Working...
                    X
                    😀
                    🥰
                    🤢
                    😎
                    😡
                    👍
                    👎