Announcement

Collapse
No announcement yet.

help a super NEWB!!!

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    help a super NEWB!!!

    somebody help me!! i need a professional advice on which am i goin to buy. a GSR26R or a superbigfoot w/ G260rc engine ? i want it chromed out from top to bottom. am i to buy a stock ped then upgrade it or just assemble one? I want SPEED, POWER and CHROME!!! here's the list that i want, ADA S1 pipe, TGN air filter, pro flow exhaust, scooterpro airscoop, ADA juicebox, TS billet Crankcase, TS billet fancover and ADA headkit. im not goin to race it but i want it fast . i need big tires coz our street is not that smooth . i want it chromed all the way . I found most of my parts in Davesmotorsports.com. Is there a cheaper store ? help me out dudes!! tis is my very 1st ped and i want it to be a BAADASS!!! THANK YOU!!!
    Tags: None
  • #2
    It just depends on how much $$$$ you want to spend.
    Modded out Super x ped, G2d xped,
    Modded out Yamaha wave blaster, and a Stock Yamaha wave raider.
    Ride Yamaha

    Comment

    • #3
      $2000 only. help me out man!!!

      Comment

      • #4
        tel me man, are all d upgrades i mentioned worth it? can u suggest anything? something? should i buy a stock ped then upgrade it or Build my own?????

        Comment

        • #5
          is it better to get a air scoop or a block off plate or pull start? why?
          GO-PED SPORT: ExTrEmE ToYs PiPe, bLuE NeOnS, Hp CaRb, .800 SpInLdE, ToP SpEeD 45kph

          Comment

          • #6
            Scootrz

            My go ped i only use on the track but if you are just cruzin the streets i sujest u get the asa mp the company i work for sends scooters buy cod the mp is a great scooter its only 500$ Australian our web site is
            https://www.asap-scooters.tk

            ph is 0432-182-961 our mp is Centrifical cluch Chain driven rear wheal free spin 1 ltr fuel tank Zip start and protechtion plate the protection plate is a steel plate over the pull starter ot our Email is [email protected]
            Last edited by Scooterz; 09-25-2004, 07:44 PM. Reason: incorect spelling

            Comment

            • #7
              Originally posted by Barracuda
              tel me man, are all d upgrades i mentioned worth it? can u suggest anything? something? should i buy a stock ped then upgrade it or Build my own?????

              You could Build one hell of a Superbigfoot with 2Grand. I would start from the Ground up and Go from there. That way you wont have a whole nether Superbigfoot sitting in loose parts lol.
              Modded out Super x ped, G2d xped,
              Modded out Yamaha wave blaster, and a Stock Yamaha wave raider.
              Ride Yamaha

              Comment

              • #8
                Originally posted by tim
                is it better to get a air scoop or a block off plate or pull start? why?
                an air scoop is best for the rc style flywheel because it has fins on both sides.the LH flywheel has fins only on the inside and needs a block off plate.you dont need a pull start unless you have a go-quad or a chain drive ped like a GSR.
                HOLLISTER RACING Phoenix,AZ
                Amsoil Dealer
                Flowsystem Racing Dealer-north west Phoenix

                Comment

                • #9
                  Originally posted by CORVETTEJIM1968
                  an air scoop is best for the rc style flywheel because it has fins on both sides.the LH flywheel has fins only on the inside and needs a block off plate.you dont need a pull start unless you have a go-quad or a chain drive ped like a GSR.

                  With 2 grand dont waste your time buying and upgrading a superbigfoot.

                  Get a GSR40 TSi and put the 60 conversion kit on it.
                  aka Flow

                  Comment

                  • #10
                    Originally posted by firebush
                    With 2 grand dont waste your time buying and upgrading a superbigfoot.

                    Get a GSR40 TSi and put the 60 conversion kit on it.
                    thats pretty much what pedhead7 has his cylinder is stock and it does 41.5 real mph.notice i said real
                    HOLLISTER RACING Phoenix,AZ
                    Amsoil Dealer
                    Flowsystem Racing Dealer-north west Phoenix

                    Comment

                    • #11
                      Originally posted by CORVETTEJIM1968
                      thats pretty much what pedhead7 has his cylinder is stock and it does 41.5 real mph.notice i said real
                      A stock TSi will not go 41.5 mph.
                      aka Flow

                      Comment

                      • #12
                        Honestly dont buy a stalk goped then fix it up. Buy one off ebay or a local scooter store and buy one a little better then stalk.

                        Comment

                        • #13
                          i disagree, i dont trust anybody EVER, if they say they fixed it up with a series one ada pipe, chances are they pulled it out of their ***, and / or its broken. with 2 grand you can do a ****load, but start off with a g260rc engine, i have one on my sikk and its extremely reliable, had it for a year and it has NEVER given me probs. then invest in parts later, do your research. Of course start off with exhaust, ( ada makes some pretty nice ones depending if u want accel or speed ). work your way up from their. its amazing what u can find just by checking up on these threads daily

                          Comment

                          • #14
                            To "Tim" Block off plate or scoop ect ect...

                            Ok ok, if u do have your pull start then, just take a dremel or soming that will cut a 1/8 of an in wide 2 inch long cut, then behind that cut do two 1/4 drill holes and do this at an angle heres a diagram

                            -------- - 2 in. sLIT 1/8 in wide - ( ============={ - pullstart cord
                            ( -
                            -- -
                            -- --
                            -- --
                            -- 0
                            -- 0 -- two 1/4 inch holes at angle
                            --------
                            My GoQuad Is Faster Than A Negro On Crack

                            Comment

                            • #15
                              dang it didnt come out right well if u need info on ho privat messge me or AIM me
                              My GoQuad Is Faster Than A Negro On Crack

                              Comment

                              Previous template Next
                              Working...
                              X