why does my friends goped go faster than mine

[Sikk Toys rider]

my friends go ped has a sikk toys end bleed pipe with a g230 motor but he is using a stock carb tha are on the sports. Mine has a 29cc big bore kit from sikk toys with a 35mm piston that I am using with my g230 crank case with a 2mm crank shaft I also have a hp carb sikk toys torque pipe and a ada juicebox. so how can I lose

[Sikk Toys rider]

no is replying that sucks.

[pedhead7]

How much do you weigh? How much does he weigh?
What Spindels are you Guys running?
Theres a lot of variabels here bro.

[Sikk Toys rider]

first of all i weigh 80lbs ithink he weighs 137lbs i have an .850 he has a .710 but i think its my back tire because my ped vibrates big time

[2Fast4You]

Is your scooter from Tijuana? With all the factors you said you probably broke it in wrong. I would get rid of it.

[gopeder123]

maybe your tire is burned out?

[pedhead7]

. I would get rid of it.

Crack Kills. I think somebody is a lil bit spoiled................

[2Fast4You]

Crack Kills. I think somebody is a lil bit spoiled................

I dont mean just throw it away. I mean trade it in for another or sell it and use that money to buy another... just start new because something is really rong with that scooter.

[pedhead7]

I dont mean just throw it away. I mean trade it in for another or sell it and use that money to buy another... just start new because something is really rong with that scooter.

You still dont sell it towards a new ped. FIX IT! Im willing to bet its the piston ring. When I run my series one on my modded 230RC itll easily spank a 260 or any sikk motor, but then about a week later of riding it hard itll get spanked by a stock sport, just because the piston ring is TOAST. By then its really easly to just turn the motor over by hand lol.

[Ryan86]

my friends go ped has a sikk toys end bleed pipe with a g230 motor but he is using a stock carb tha are on the sports. Mine has a 29cc big bore kit from sikk toys with a 35mm piston that I am using with my g230 crank case with a 2mm crank shaft I also have a hp carb sikk toys torque pipe and a ada juicebox. so how can I lose

Prolly 'cause you have Sikk parts on your engine Just playin. Is your carb tuned correctly? Also, this is not likely the problem, but how are your wheel bearings? One time my were almost frozen and it was slowing me down a bit.

If its not the tire causing the vibration, you might wanna tear down the engine to see if it's alright.


Your friend is kinda crazy running a G23LH carb on his G230RC.

[Sikk Toys rider]

I settled this problem a long time ago I got a 35mm slippery nickel piston and let my motor idle for 3 tank fulls of mixed gas it runs way faster.

[Slimcandy428]

I settled this problem a long time ago I got a 35mm slippery nickel piston and let my motor idle for 3 tank fulls of mixed gas it runs way faster.

The proper way to break in a new piston and ring is to actually put a load on the motor and run about a tank-tank 1/2. Running through 3 tanks at idle with no load is not the proper way.

[Sikk Toys rider]

I am going to kick the guy at scotts motor sports a**.

[Slimcandy428]

I am going to kick the guy at scotts motor sports a**.

If that's what he told you to do, then he is very misinformed.

[Sick Shift]

I am going to kick the guy at scotts motor sports a**.

Did he really say idle it for 3 tanks of gas?