Clutch - What will it work with?

[wimmig02]

Exactly what lockdowns and engine mounts will the clutch work with, and what wont it work with?

I want to get one up ASAP but do not want to risk the strength of my mount by cutting it up as one of the GPN members did.

http://www.gopednation.com/forum/showthread.php?t=159382

[ADAmike]

The clutch will work with the ADA engine mount and any lockout if the bottom lockout side mounting tabs on both the billet and cast clutch housings are ground off to allow clearance for the rodend of the lockout turnbuckle.

[wimmig02]

The clutch will work with the ADA engine mount and any lockout if the bottom lockout side mounting tabs on both the billet and cast clutch housings are ground off to allow clearance for the rodend of the lockout turnbuckle.

Would you be so kind as to put up an image of this with those parts outlined? And would the grinding (i imagine?) of the tabs weaken the item at all?

[NIIN20]

Here are pictures of my mount that I clearanced for the clutch. I also elongated the hole for the lock out. I personally dont think I sacraficed that much strength.

[ADAmike]

Here are pictures of my mount that I clearanced for the clutch. I also elongated the hole for the lock out. I personally dont think I sacraficed that much strength.

You did a great job on that mount.

Wimmig I will see what I can do about getting you some pictures of it modified for the ADA engine mount.

[NIIN20]

Thanks Mike. Its kinda sloppy, I was in a hurry. LOL