2mm Stroker, and Pistin sleeve length

[RacerGuy_7]

just prior to building this engine with a 2mm stroker, and a bigbore kit.

my question to you guys is this....

knowing that the sleeve length for the regular piston is longer for stock stroke, how much of the sleeve length shoudl i have to remove for proper operating clearance for the 2mm full circle crank.

the older style, simular to the 2mm G2D full circle crank.

thank you.

[Slimcandy428]

You will have to remove a small amount from the skirt. When I mean small amount, I mean next to nothing. This is with a Oem Big bore piston.

[RacerGuy_7]

is that within a mm or two?

[Slimcandy428]

2mm Superior crank. No modifications are needed for the 1mm.

[RacerGuy_7]

sorry for the misunderstanding, but i was refering to the skirt shaving length....do i shave it a 1mm or so/

[Slimcandy428]

Oops.. Were talking about 10 thousandths maybe less. I just shave it a tad bit then half stick it on and test it out.