My Engine!!

[goodk2skater]

Hi, I have the stock old school go ped engine, and when ever i ride it for like 10 min the engine will not rev. high, then stall, but after i losen the gascap and allow air into the gas tank the engine will start back up with no problem! Can any one tell me what this problem is??

[Fletch124]

its probably that you have so much pressure built up in 10min. and then it forces to much gas into your carb at once and that probably why its stalling what you might want to do is drill a hole threw the top of your gas cap and then glue like a nipple in the top and get a peice of rubber hose preferably some extra gas tank line and just stick on and run the end of the line like if you have the stock carb then just put it in the intake slots at the bottom of you intake and try something to hold it there and that way all the gas fumes go right back into your ped or just feed out under the board and i would wait for more replys before you go ahead and do what i said so you can see what everybody else says

[Slimcandy428]

Actually the tank is getting vaccumed. But drill a hole and install fuel line in the gas cap as stated above. That will solve your problem.

[CBlakeNS]

Originally posted by Slimcandy428
Actually the tank is getting vaccumed. But drill a hole and install fuel line in the gas cap as stated above. That will solve your problem.

Gas Tank Mod....

Also it has detailed instructions on www.goped-haven.com with pictures also I think.