Announcement

Collapse
No announcement yet.

Juice box great, Kill switch problem now

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Juice box great, Kill switch problem now

    I just got my juice box and it works great. I have two power bands now instead of one . When I first tried to start it it wouldn't start until I disconected the kill switch. Now it runs but to shut it off I have to connect the switch. Do I have to run a seperate wire from the switch to the coil?

  • #2
    If it is the GSR version then you are going to need to run a seperate wire from the coil to the kill switch on the handlebars. What is happening is the kill switch is grounding out through the intake manifold that is now metal and not plastic. You could also just move the kill switch back to the rear on the engine as well which will also eliminate using the throttle cable as the kill switch wire.

    Comment

    Working...
    X
    😀
    🥰
    🤢
    😎
    😡
    👍
    👎