Announcement

Collapse
No announcement yet.

Evo 2 with 63cc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Evo 2 with 63cc

    20150908_015813.jpgThe first 63cc I bbuilt and installed was on my og evo 2 its been sitting while I built the gsr 63.Time to go back to the evo 2 .That engine I ported and reeded tuurns 10,800 rpm with the puzzey power pipe.I took a new cylinder out of the box and ported it for the evo,this one has better port timing the transfers are staggered and raised the primary 10 degrees and the secondary 6 degrees.this engine has the transfers opening at 125 degrees atdc they are real low,I had to port the tensfers a lot
    DDM/Jetpro/Huasheng dealer.

  • #2
    20160114_214015.jpg
    DDM/Jetpro/Huasheng dealer.

    Comment


    • #3
      20160114_214046.jpgexhaust is better on this one the ex opens at 93 degrees atdc and is 28.5 mm wide,I will install it tomorrow
      Last edited by evo guy; 01-15-2016, 12:40 AM.
      DDM/Jetpro/Huasheng dealer.

      Comment


      • #4
        20160114_214212.jpgThe Stock Ex Port Opens At 102 Degrees Atdc And Is 26 mm wide ,the boost port opens at 127degrees atdc.
        DDM/Jetpro/Huasheng dealer.

        Comment


        • #5
          20160114_213954.jpg TJS reed
          DDM/Jetpro/Huasheng dealer.

          Comment


          • #6
            what does that reed come off of?

            Comment


            • #7
              Originally posted by f1gopedder View Post
              what does that reed come off of?
              I think that's his own custom reed for that engine.

              Comment


              • #8
                Originally posted by gtr46 View Post
                I think that's his own custom reed for that engine.
                very cool.

                Comment


                • #9
                  20151215_143850.jpgHi ,That My Reed,There Are 4 Prototype Reeds Made And Has .010 Reeds With Ajustable Rev Strips (Blue Strip) To Ajust The Tension Of The Reed Petals.They Will Be For Sale Soon.
                  DDM/Jetpro/Huasheng dealer.

                  Comment


                  • #10
                    20160115_104818.jpgbroke it out from behind the display counter its been back from last summer .I call it evil evo 2.
                    DDM/Jetpro/Huasheng dealer.

                    Comment


                    • #11
                      20160115_104826.jpg
                      DDM/Jetpro/Huasheng dealer.

                      Comment


                      • #12
                        20160115_104920.jpg
                        DDM/Jetpro/Huasheng dealer.

                        Comment


                        • #13
                          20160115_104858.jpgI am installed the new ported cylinder on this ped
                          DDM/Jetpro/Huasheng dealer.

                          Comment


                          • #14
                            20160115_120042.jpgMy Evo 2 63Cc And My Gsr 63
                            DDM/Jetpro/Huasheng dealer.

                            Comment


                            • #15
                              hola. come trabajo, bien? gracias.

                              Comment

                              Working...
                              X