I have two completely original California Go-Peds, with Geo-Sport stickers. They appear identical except for color (red vs blue) and a minor difference in the air filter housings. Both have the GZ25N14 engines, with Walbro WYA-5 carbs. Both have the Mach 12 plastic rims with 2.5 x 6 solid tires. Both...

...

I have a big foot with the Ada clutch lockout posi lock and third bearing, my problem is I put the spindle on the clutch and it would come loose while riding. I had it tightened all the way with loctite, the spindle bolt broke off into the outer drum on the clutch. I had bought another drum and spindle...

I have had this problem twice now don't know why it is happening. I have a 54mm Ada clutch on a g320 with lockout and thirdbearing for a Bigfoot. I put the spindle on and it rode fine for about 5 minuets then the spindle bolt will break off inside the drum. I had to get a new drum for the clutch and...

Hey Guys!

I just picked up a used GTR-interceptor for $450 bucks, here locally! It had one previous owner, and doesn't seem to have been ridden hard at all. However it does look like it may have been stored outside in cold weather. Luckily, there's no rust, and everything seems go be...

Hello,
New here after reading all this week and just bought my first used Bigfoot this week. Took it out for the first time today and now it looks like I'm having problems with the clutch. It will not raise or lower the engine.

Does this sound like a spring issue or a clutch cable...

Hey guys, I fixed my gsr46r and installed an ada chain tensioner (the week before they went on sale!). I put 40-50 miles on it until another issue popped up. As I was riding home, the ped jerked and rev'd to the moon. It behaved like the chain popped off, but it didn't. It starts right up, but when...

Hi guys,

My name is David and im new to the forum as well as to gopeds. I bought a stock big foot (yellow frame) and quickly decided it wasnt quick enough for me. Shortly afterwards i purchased the following

cy27rc
Ada lockdown
Ada third bearing support...

Like the title says, looking for a tm 460 to 40 clutch adapter. Preferably new but will consider used if in great shape. Thanks

so I have bought a Black GTR with less then 1gallon of gas through it for 650

order new clutch savers to swap out stock springs, strip the torx head on the clutch plate removal, drill off heads

but its okay I guess, one of the pads was missing a chunk....
...

So today while disassembling my cutch I stripped the three torx head screws that hold the clutch plate. I was using the proper size torx wrench and was utilizing a piston stopper.

these suckers must have loc-tite from the factory on them or something...

How can I remove...

i have the original red clutch springs on my gp460 and i know i have to swap them out for some lower rpm engagement springs..here's a place i found online which have more variety than DDM.

...

Wtd clutch kit for Bigfoot + black magic spindle
Make your offers and post pictures !
Thank you

Im looking for an original style gsr40 clutch housing. Not the type they sell on DDM. I bought an ADA chain tensioner and it will not mount to the new style housing. Please PM me if you have one you would like to sell.

seth-

Planning on slapping a 78mm on my G240RC and making a special BILLET adapter plate to mount the RC engine onto the 78mm mount so I can use my Tensionator

What clutches have others used for this mod?

Thoughts? Ideas? Suggestions? Comments?

Peace and...